Technical, commercial, and installation questions about EHP® (Enhanced Heat Performance) nanotechnology radiators.
EHP® radiators contain a sealed nanotechnology working fluid — non-corrosive, non-flammable, non-refrigerant. This fluid transfers heat from a low-temperature source (30–35°C supply) to the room surface faster and more evenly than water at twice the temperature. The result is the same room temperature for significantly less energy input.
The mechanism is a property of the fluid's thermal conductivity at the nanoscale — engineered, measurable, and consistent. What is EHP® →
The up-to-55% figure is sourced from Enover Heat Systems Inc. documentation and confirmed by HNordic's evaluation process. The actual reduction in any given building depends on the existing system temperature, the building's thermal profile, and how the installation is configured. We model the expected reduction for your specific building before installation. The figure is directional; the site assessment gives you the specific number.
The working fluid is a sealed, non-corrosive, non-flammable compound. It is not a refrigerant — no F-gas regulation applies. It does not require inhibitors, top-up, or replacement. It is sealed at manufacture and remains sealed for the life of the product. We do not publish the chemical composition — this is proprietary to Enover Heat Systems Inc.
Most commercial heat pumps are designed to operate at 35–45°C. When paired with conventional radiators that require 55–80°C, the heat pump is forced beyond its efficient range. COP drops and running costs rise.
EHP® central heating radiators operate at 30–35°C — within the range the heat pump was designed for. The heat pump operates efficiently. The building gets the performance the heat pump was specified to deliver.
Note: the COP improvement applies when EHP® is paired with the heat pump's heating circuit. It is not a general claim for all configurations.
EHP® central heating radiators are compatible with standard commercial boilers and heat pumps. The supply temperature requirement is 30–35°C. Any system capable of delivering this temperature — which includes most modern commercial boilers and all heat pumps — is compatible.
EHP® electric radiators are powered by a 230V / 50Hz standard socket. The element heats the same nanotechnology working fluid to operating temperature. Supply temperature in the electrical sense does not apply — the electric element drives the fluid directly.
EHP® central heating radiators connect to existing pipework with standard radiator valve connections. No specialist tools. No new pipework. The working fluid is sealed — no system fill or flush of the EHP® component required.
Installation is carried out by a certified plumber. The full deployment timeline — survey through handover — is typically eight weeks for a commercial building installation.
Plug into a standard 230V socket. No pipework. No plumber. No building works. No electrical certification required for the socket connection. A wired connection is available where preferred — this requires a certified electrician.
Yes. EHP® central heating radiators and EHP® electric radiators can be specified together — central heating radiators in areas with existing pipework, electric radiators in spaces where pipework modification is not practical. Both variants are controlled through the same app.
The typical timeline for a standalone EHP® radiator installation in a commercial building:
For full HNordic stack installations (turbine, BESS, and EHP® radiators together), the standard 16-week HNordic timeline applies.
No. The working fluid is sealed at manufacture. No inhibitor. No annual flush. No pressure testing. No service visits. The maintenance cost over 25+ years is structurally zero.
EHP® radiators are available through HNordic and our partner network. Contact us with your building details — we assess the installation and connect you with the appropriate installer or distributor in your region.
EHP® radiators are available in configurable height and length combinations — specification is site-specific. We assess the building's thermal profile, including windows, ventilation, and occupancy patterns, before recommending dimensions. We do not publish a standard product selector — every installation is assessed individually.
Yes. EHP® radiators are well-suited to new-build specification — particularly in low-energy commercial buildings where the design supply temperature is already targeting heat pump compatibility. For architects →
Primary markets: Sweden, United Kingdom, Ireland. Expanding: all Nordic countries (Norway, Denmark, Finland, Iceland). Enquiries welcome from across Europe.
EHP® radiators are the heating component of HNordic's integrated energy infrastructure — alongside a cylindrical wind turbine, battery energy storage, and an AI energy management system. In a full installation, EHP® radiators reduce the energy the generation system needs to serve, compressing whole-system payback.
EHP® radiators can also be installed as a standalone product — without any generation component.
No. EHP® radiators are the product sold from heat.hnordic.com. For cylindrical wind turbines and battery storage, see wind.hnordic.com. For the full integrated system, see hnordic.com.
Still have a question?
If your question is not answered here, we will answer it — in writing, with a specific answer for your building or project.
Get in touch