Dutch office buildings must now hold a minimum energy label C. Enforcement is active. The label A trajectory extends to 2030 — and heating efficiency is the primary lever available.
The Netherlands has one of the most advanced — and most actively enforced — building energy labelling regimes in Europe. Office buildings above 100 m² are now required to hold a minimum energy label C, with enforcement by regional authorities underway from 2026. The trajectory does not stop at label C: the Dutch government has set a label A target by 2030 for the office building sector. EHP® (Enhanced Heat Performance) nanotechnology radiators are the most direct heating-sector improvement measure available to Dutch commercial building owners working toward both obligations simultaneously.
Compliance obligation
Regulatory type: Compliance obligation — minimum energy label for occupied office buildings
Administering body: Omgevingsdiensten (regional environmental services); municipalities; RVO and EP-online as the central register
Key dates: Energy label C minimum — active enforcement from 2026. Buildings that cannot demonstrate label C compliance are liable to be taken out of use. Label A trajectory — 2030.
Source: RVO — Energielabel C kantoren
Dutch office buildings with a gross floor area above 100 m² that are used as offices must hold a minimum energy label C. The obligation has been in force since 1 January 2023; enforcement by the Omgevingsdiensten — regional environmental agencies — began in 2026. Buildings that cannot demonstrate compliance are reported through the RVO EP-online register and are liable to enforcement action, including being taken out of use until the required label is achieved.
The energy label for non-residential buildings in the Netherlands is based on the specific energy index (energieprestatie-index, or EI). The EI is calculated from the building's energy demand for heating, cooling, hot water, ventilation, and lighting — weighted and normalised per square metre. Heating is the dominant component for the majority of Dutch office buildings, which rely on gas-fired central heating systems with high supply temperatures. Reducing heating energy demand reduces the EI directly, which improves the label.
The label C obligation is a floor, not a destination. The Dutch government has signalled a label A trajectory for the office sector by 2030, aligned with the MEPS requirements under EPBD 2024 that the Netherlands is required to transpose. Buildings that achieve label C compliance now face a further improvement requirement within four years — and the most cost-effective path to label A runs through heating efficiency improvement.
How EHP® is affected: An EHP® central heating radiator installation reduces the heating energy demand component of the EI calculation — the largest single contributor for most Dutch office buildings. The reduction is measurable and appears directly in the next energy label assessment. For buildings currently rated D or E, an EHP® installation may be sufficient to achieve label C compliance without additional fabric or building management investment. For buildings targeting label A by 2030, the same installation contributes the most significant single improvement available from a building services intervention.
Performance trajectory
Regulatory type: Building performance trajectory — minimum energy performance standard for existing non-residential buildings
Administering body: Ministerie van Binnenlandse Zaken en Koninkrijksrelaties (BZK); RVO implementation; Omgevingsdiensten enforcement
Key dates: 16% of worst-performing non-residential buildings to meet minimum energy performance threshold by 2030. 26% by 2033. BACS mandatory for non-residential buildings with HVAC above 290 kW from 1 January 2026.
Source: EU — Energy Performance of Buildings Directive 2024/1275
The Netherlands is required, as an EU member state, to implement the minimum energy performance standards (MEPS) under EPBD 2024. This requires the worst-performing 16% of non-residential buildings to meet a minimum energy performance threshold by 2030, rising to 26% by 2033. Dutch buildings already below energy label C are in scope for both the current enforcement regime and the approaching MEPS deadline simultaneously.
The BACS mandate — building automation and control systems required for non-residential buildings with HVAC systems above 290 kW from 1 January 2026 — adds a further compliance layer for larger commercial buildings. A building whose heating system operates at reduced load and temperature — as a result of an EHP® installation — is more likely to fall below the 290 kW BACS threshold, or to satisfy the BACS requirement with a simpler control system.
The convergence of the label C enforcement regime, the label A 2030 trajectory, and the EPBD MEPS obligation means Dutch commercial building owners are managing three overlapping performance requirements with a shared solution space. Heating improvement is the primary lever in all three — and the building that invests in EHP® central heating radiators now is addressing all three simultaneously.
How EHP® is affected: The EHP® installation reduces the heating energy demand figure that feeds into the Dutch energy label calculation, the MEPS assessment, and — for larger buildings — the BACS threshold calculation. For a Dutch office building owner facing label C enforcement and a 2030 label A trajectory, EHP® is not three separate investments. It is one installation that improves the position across all three instruments at once.
Enterprise obligation
Regulatory type: Compliance obligation — mandatory enterprise energy audit for large energy consumers
Administering body: Rijksdienst voor Ondernemend Nederland (RVO); Netherlands Enterprise Agency
Key dates: First EED recast audit deadline — 11 October 2026. Enterprises above 85 TJ: certified energy management system required by 11 October 2027.
Source: RVO — Energieaudits grote ondernemingen
Dutch enterprises consuming more than 10 TJ per year — approximately 2,778 MWh of total energy — were required to complete an independent energy audit by 11 October 2026. The deadline has passed. The Netherlands transposed the EED recast enterprise audit obligation through the existing Erkend Maatregelenpakket (EML) framework — meaning that Dutch enterprises may satisfy the audit obligation by implementing measures from the recognised measures list rather than commissioning a full independent audit.
EHP® central heating radiators are consistent with the energy-saving categories in the EML framework. An enterprise operating a commercial building portfolio in the Netherlands may count EHP® installations toward the documented improvement measures required under the EML compliance pathway — without necessarily commissioning a separate audit, where the portfolio already falls within the EML scheme's scope.
How EHP® is affected: For Dutch enterprises within the EML framework, EHP® installations contribute directly to the documented measures that satisfy the compliance obligation. For enterprises that have completed a full EED recast audit and received a heating recommendation, EHP® installations address the finding before the next compliance cycle in 2030.
Worth knowing
The Omgevingsdiensten have the authority to report non-compliant office buildings to the EP-online register immediately — and once registered as non-compliant, a building can be taken out of use. Dutch enforcement practice is more active than the equivalent process in most other EU member states; the label C obligation is not aspirational. Buildings reported as non-compliant in 2026 face a real risk of enforcement action within the same calendar year.
The practical consequence for building owners is that the time between identifying non-compliance and needing a solution is shorter in the Netherlands than elsewhere. An EHP® central heating radiator installation — from survey to commissioning — can be completed in approximately eight weeks. For a building owner facing an enforcement notice, that timeline is relevant: it is short enough to initiate before an enforcement decision is finalised, and the energy label reassessment can be commissioned immediately after installation.
Netherlands — project enquiry
Tell us your building type, your energy label, and your compliance position — we will advise on how EHP® radiators fit your Dutch regulatory obligations.
Get in touch