The two regulatory instruments that are changing the economics of commercial heating in Sweden — and what they require of building owners and enterprises now.
Sweden operates two distinct regulatory frameworks that bear on commercial heating decisions: the enterprise energy audit obligation under the EKL Act — transposing the EU Energy Efficiency Directive recast — and the Swedish energideklaration, the building energy certificate that affects lettability, valuation, and sale. They address different audiences and trigger at different points, but both create a documented, measurable case for heating efficiency improvement. EHP® (Enhanced Heat Performance) nanotechnology radiators address the primary finding of both instruments.
Compliance obligation
Regulatory type: Compliance obligation — mandatory enterprise energy audit with four-year cycle
Administering body: Energimyndigheten (Swedish Energy Agency)
Key dates: First EED recast audit deadline — 11 October 2026 (passed). Enterprises above 85 TJ: ISO 50001 certified energy management system required by 11 October 2027. Next standard audit cycle: October 2030 for enterprises that completed the October 2026 audit.
Source: Energimyndigheten — Energikartläggning i stora företag
Swedish enterprises consuming more than 10 TJ per year — approximately 2,778 MWh of total energy — were required to complete an independent energy audit and submit findings to Energimyndigheten by 11 October 2026. The deadline has passed. Enterprises that have completed the audit are now in a four-year compliance cycle; the next audit falls due in October 2030. Enterprises that did not complete the audit face penalty exposure and should seek advice from an accredited energy auditor immediately.
The audit structure under SS-EN 16247 requires auditors to identify and document significant energy consumption in the enterprise — and for most commercial buildings, heating is the dominant category. The audit report must quantify the energy savings available from identified measures and rank them by cost-effectiveness. Heating system improvement consistently appears as the highest-ROI intervention in Swedish commercial buildings, where space heating accounts for a large share of total energy consumption — particularly during the long heating season.
How EHP® is affected: An EHP® central heating radiator installation directly addresses the primary finding of a Swedish enterprise energy audit. Heating energy reduction of up to 55% is a measurable, documentable outcome — the kind the audit report is required to record, and the kind that Energimyndigheten expects to see actioned in the next compliance cycle. For enterprises that have completed their October 2026 audit and identified heating as the primary intervention, EHP® installations are the logical next step. For enterprises preparing for the October 2030 cycle, an EHP® installation undertaken now produces documented savings that reduce the findings the next auditor will need to report.
Building energy certificate
Regulatory type: Mandatory building energy certificate — required on sale, rental, and for buildings above size and use thresholds
Administering body: Boverket (National Board of Housing, Building and Planning); registered energy experts conduct the declaration
Key dates: Required when a building is sold or let. For certain building categories — including commercial buildings above specific size thresholds — periodic renewal is required regardless of transaction. No single national deadline; obligation arises on transaction or at the renewal point for the relevant building category.
Source: Boverket — Energideklaration
The Swedish energideklaration records a building's specific energy use — measured in kWh per square metre of heated area per year — and assigns an energy class from A (most efficient) to G (least efficient). The certificate is mandatory when a building is sold or let, and must be available to prospective buyers or tenants. For commercial buildings above the relevant size threshold, the energideklaration must be renewed on a fixed cycle even without a transaction.
The energy class directly affects commercial value. Tenants — particularly larger organisations operating under their own sustainability commitments — increasingly specify minimum energy performance in lease requirements. Investors and lenders are applying energy class screens to acquisition and financing decisions. A building rated E or F is measurably harder to let and finance than an equivalent building rated C or B.
The specific energy figure in the energideklaration is calculated from the building's measured or estimated energy consumption per square metre. Heating is typically the largest single contributor. A reduction in heating energy consumption — produced by an EHP® installation — reduces the specific energy figure directly, which moves the building up the energy class scale.
How EHP® is affected: An EHP® central heating radiator installation reduces the primary input to the energideklaration calculation. The operating temperature reduction — from 55–80°C to 30–35°C — combined with the significant reduction in system water volume, reduces the heating energy drawn from the building's supply. This reduction appears directly in the specific energy figure. For buildings currently rated D, E, or F, an EHP® installation may be sufficient to move the rating to C or above — the threshold that tenants and lenders increasingly treat as a minimum. The improvement is measurable, documentable, and appears in the next energideklaration issued for the building.
Worth knowing
For enterprises that completed their EKL audit by 11 October 2026, the compliance cycle is now active. Energimyndigheten expects to see documented progress against the audit findings at the next submission. The audit report identified the interventions — it did not mandate a timeline for implementing them, but the expectation of a functioning compliance culture is embedded in how the four-year cycle is designed to work.
The practical consequence is that most Swedish enterprises above the 10 TJ threshold now hold an energy audit report that names heating improvement as a priority — and have until October 2030 to demonstrate what they did about it. An EHP® installation undertaken now produces documented energy savings that are directly traceable to the audit finding, with four years of measured performance data available before the next auditor arrives. That is not a compliance argument. It is a straightforward description of how the cycle works.
Sweden — project enquiry
Tell us your building type, your energy consumption, and your compliance position — we will advise on how EHP® radiators fit.
Get in touch