EHP® radiators use a nanotechnology working fluid to deliver more heat from less energy — at half the supply temperature of a conventional system.
A conventional steel panel radiator is, in effect, a water tank. Hot water enters, fills the entire radiator body, and transfers its heat through the steel panels to the room. For that transfer to work efficiently across the full surface area, the water needs to be hot — 55–80°C. Getting water to that temperature, holding it there, and continuously circulating it through every radiator in the building is where almost all the energy in a conventional heating system goes.
The radiator is not the inefficiency. The water-filled design is.
EHP® radiators work on a fundamentally different principle. Instead of water filling the radiator body, a single pipe carries water through the radiator — in one side, out the other — without the water ever coming into contact with the radiator surface itself. Inside the sealed radiator body, a nanotechnology working fluid absorbs the heat from that pipe and distributes it evenly across the entire radiator surface.
The fluid itself is sealed at manufacture: non-corrosive, non-flammable, and not a refrigerant. It requires no inhibitor, no top-up, and no replacement over the life of the product. It never touches your pipework and introduces nothing reactive into your system.
The distinction matters. A conventional radiator depends on water temperature to drive heat transfer through steel — which is why the water has to be so hot. In an EHP® radiator, the nanotechnology fluid does the transfer work. It absorbs heat from a 30–35°C water supply and distributes it across the full surface area within seconds, uniformly, with no hot spots and no lag.
The result: the same surface area delivering the same heat output from less than half the energy input. The mechanism is a property of the fluid's thermal conductivity at the nanoscale — measurable, consistent, and independent of the building's existing heat source.
Rune Holm brought a prototype to an industry evaluation. He plugged it in. Within 60 seconds the thermal camera showed an even, operating-temperature surface across the entire face of the radiator. The engineer next to him picked up the camera, looked at it, and assumed it was broken. It was not broken. Both of them had never seen a radiator behave like that.
Reduction in heating energy vs conventional radiators
EHP® supply temperature
Conventional radiator supply temperature
Faster heat-up than conventional radiators
Water displaced per radiator in a central heating radiators installation
Lifespan — zero maintenance
The Hydronic variant connects to an existing wet heating system — the same pipework, the same boiler or heat pump connection. The working fluid is sealed inside the radiator. Water circulates through a tube at the base only, transferring heat to the working fluid. The radiator does not need to be filled with hot water. It needs a small, low-temperature input.
Because the system operates at 30–35°C, existing boilers and heat pumps run at significantly reduced load. Heat pumps in particular benefit — most commercial heat pumps are specified and installed correctly, but then paired with radiators that require 60–80°C, forcing the heat pump to operate at degraded efficiency. EHP® central heating radiators close that gap without replacing the heat pump.
Installation: certified plumber. Compatible with standard commercial pipework.
The Electric variant requires no pipework. A 230V standard socket. Plug in. The same nanotechnology working fluid, heated by a low-wattage element, distributes heat across the full radiator surface within seconds.
Installation requires no electrical certification — it connects to a standard socket. No building works. No pipework modification. No commissioning.
Installation: anyone. No certification required.
Hydronic and Electric variants can be specified together in the same building — Hydronic in areas with existing pipework, Electric in spaces where pipework modification is not practical. Both variants connect to the same app for unified control.
Most commercial buildings that have invested in heat pumps are not getting the efficiency the heat pump was designed to deliver. The reason is almost always the radiators. A heat pump designed to operate at 35–45°C is forced to reach 60–80°C because the radiators require it. COP drops. Running costs rise. The investment in the heat pump underdelivers.
EHP® central heating radiators operate at 30–35°C — within the range heat pumps are designed for. The heat pump runs at design efficiency. The building gets what it paid for when the heat pump was installed.
EHP® radiators contain no corrosive fluid. No inhibitor is required. No annual system flush. No pressure checks. The working fluid is sealed at manufacture and remains sealed for the life of the product.
The 25-year lifespan claim is not a warranty estimate. It is a structural consequence of having no moving parts and no reactive fluid. There is nothing to wear out and nothing to corrode.
For building operators, this means maintenance cost is structurally zero — not low, not reduced, zero. For architects and specifiers, it means no service access is required in the building specification.
5th-generation district heating networks operate at 25–35°C — a supply temperature at which conventional radiators cannot function without being oversized by a factor of roughly 2.5. EHP® radiators are designed for exactly this range as their primary operating condition.
This matters now for a specific reason: the networks are coming. Sweden has committed to fully decarbonising district heating by 2030 and is actively developing 5G infrastructure. The UK introduced mandatory Ofgem regulation of heat networks in January 2026, launched Heat Network Zoning designation, and is targeting 7% of national heat demand from district heat networks by 2035. Norway and Denmark are similarly expanding their district heating infrastructure.
A building specified with conventional radiators today is specifying itself out of future district heating compatibility. A building specified with EHP® radiators is ready for connection at the supply temperature these networks deliver — without any modification to the heating distribution system.
This is not a niche technical argument. It is a specification decision that determines whether a building can connect to low-carbon district infrastructure as it becomes available, or requires a full radiator replacement to do so.
EHP® radiators are the heating component of a full HNordic installation — alongside a cylindrical wind turbine, battery energy storage, and an AI energy management system. In that context, EHP® radiators reduce the energy demand the generation and storage system needs to serve. Lower heating demand means faster payback across the whole system.
For buildings considering the full HNordic stack, EHP® radiators are the starting point — the intervention with the shortest payback and the clearest financial case before any generation equipment is specified.
Next step
We assess your current system and model the energy reduction before you commit to anything.
Talk to us Who we work with