For property owners

The most efficient energy upgrade starts with the radiators.

Heating is your largest single energy cost. EHP® radiators reduce it structurally — without changing your heat source, your pipework, or how your building operates.

What you are going to stop paying for

In a typical commercial or residential building in Sweden, the UK, or Ireland, heating accounts for 65–80% of total energy consumption. Most of that cost is not in delivering heat to rooms — it is in getting water hot enough to make conventional central heating radiators work.

A conventional central heating radiator is full of water. Every radiator in the building holds several litres of it, and all of it has to be heated to 55–80°C and kept there before the room begins to respond. In a building with fifty radiators, that is hundreds of litres of water the system is continuously heating, circulating, and maintaining at temperature. That standing mass — and the energy cost of keeping it hot — is a structural inefficiency built into every conventional heating system.

Think of a mechanical watch movement. It kept time, but it required winding, lost accuracy gradually, and needed servicing every few years. A quartz movement keeps better time, needs almost no maintenance, and runs on a battery that lasts years. The watch looks the same on your wrist. The mechanism inside works at a fundamentally different level of efficiency.

EHP® radiators are the quartz movement for your heating system. A single pipe passes water through the base of the radiator at 30–35°C — without touching the radiator surface itself. A sealed nanotechnology working fluid absorbs the heat from that pipe and distributes it evenly across the entire radiator surface within seconds. Each medium-sized radiator displaces approximately 7 litres of water from the circuit — more for larger radiators. Less water in the system means less mass to heat, faster response, and lower standing losses across the whole building. The building looks the same. The pipework is the same. The radiator on the wall is the same size. The energy consumption is not.

Commercial building owners

You own or operate a commercial building — office space, industrial unit, hotel, retail — where heating costs are a direct charge against operating income. EHP® radiators reduce that cost structurally, not through behaviour change or smart controls, but by changing how heat is delivered.

EHP® central heating radiators connect to your existing pipework. Your boiler or heat pump remains. Your controls remain. Your heating zones remain. The radiators change. The energy consumption changes.

EHP® electric radiators require no pipework at all — plug into a standard 230V socket. Useful in spaces where retrofitting pipework is not practical, or as a rapid deployment option for individual areas. Both variants can be specified in the same building.

The financial case

Up to 55%

Reduction in heating energy consumption

25+ years

Lifespan — zero maintenance cost

30–35°C

Supply temperature — your heat pump was designed for this range

Zero

Annual maintenance cost — sealed, non-corrosive working fluid

The payback calculation is straightforward. Take your current annual heating energy cost. Apply the reduction. Divide into the installation cost. We model this for your specific building before you commit.

Heat pump recovery

If your building has a heat pump that is underperforming, the cause is almost always the radiators. Heat pumps are designed to operate at 35–45°C. When the radiators require 60–80°C, the heat pump is forced beyond its efficient operating range. COP drops. Running costs rise.

EHP® central heating radiators operate within the range your heat pump was designed for. You recover the yield you paid for when the heat pump was installed — without replacing it.

EPC and building rating improvement

EHP® radiators reduce heating energy demand — which directly improves your building's energy performance rating. For commercial landlords under UK MEES obligations, or building owners preparing for EPBD 2024 requirements across the EU and Ireland, EHP® radiators are one of the highest-ROI interventions available. They attack the largest cost line — heating — rather than targeting secondary systems.

Housing associations and residents' management companies

A housing association board carries energy costs on behalf of its members. Every krona, pound, or euro spent on heating the building comes from service charges. Every improvement in the building's energy performance rating improves the ability to refinance, attract buyers, and protect unit values over time.

EHP® radiators address both directly.

The service charge argument

A full building retrofit with EHP® central heating radiators — replacing existing central heating radiators across all units and common areas — reduces the heating energy cost for the entire building by up to 55%. That reduction flows directly into lower service charges for members, or into a reserve that improves the association's financial position.

The maintenance argument is equally significant. EHP® radiators contain a sealed, non-corrosive working fluid. No inhibitor. No annual flush. No pressure checks. No service visits — for 25 years. The annual maintenance budget for the radiator system drops to zero. That saving compounds over the life of the product.

The board decision

EHP® installations in apartment buildings are typically phased by floor or stairwell, which allows the board to manage capital outlay and disruption across a planned programme rather than committing the full investment upfront.

Installation of EHP® central heating radiators is carried out by a certified plumber. No building works. No structural modifications. Existing pipework remains. The decision the board needs to make is a straightforward capital allocation — with a modelled return we provide before any commitment is made.

Energy performance rating

For Swedish bostadsrättsföreningar, the energideklaration rating directly affects how the building is perceived by buyers and lenders. For UK residents' management companies, EPC ratings increasingly affect mortgage availability on individual units. EHP® radiators reduce heating energy demand — the largest single factor in most residential building energy ratings.

A retrofit that improves the building's energy performance rating is not just an operating cost reduction. It is an asset protection measure.

What changes — and what does not

EHP® central heating radiators connect to your existing pipework. Your boiler or heat pump remains. Your controls remain. Your heating zones remain. The installation is carried out room by room or floor by floor, with minimal disruption to occupants.

EHP® electric radiators require no pipework — plug into a standard 230V socket. Useful in spaces where pipework modification is not practical, or where rapid deployment is needed without building works.

Both variants can be specified in the same building.

Qualifying your building

EHP® radiators are suitable for most buildings with an existing central heating system, or any building where EHP® electric radiator variants are appropriate. The assessment covers:

Specification is always site-specific. We assess windows, ventilation, occupancy, and existing system performance — not just floor area.

Part of the HNordic energy system

For commercial property owners considering a complete energy upgrade — generation, storage, and heating — EHP® radiators are the heating component of HNordic's integrated system. In a full installation alongside a cylindrical wind turbine and battery storage, EHP® radiators reduce the energy the generation system needs to serve. Lower heating demand compresses payback across the whole installation.

HNordic integrated energy solutions →

Next step

Commission a building assessment

We assess your building and model what EHP® will actually deliver — for your specific system, your energy costs, and your occupants — before you commit to anything.

Get in touch How EHP® works